Sainsmart Genmitsu PROVerXL6050 Plus default GRBL settings
- James Dean Designs
- October 19, 2022
- Default GRBL settings
- Default GRBL, GRBL settings, Sainsmart, Sainsmart Genmitsu PROVerXL 6050 Plus
- 1 Comment
Below is the list of default GRBL settings for the Sainsmart Genmitsu PROVerXL 6050 Plus GRBL settings should you need to restore them to the factory originals.
90% of the settings you will not need to change. A couple that you may want to change are $1=255, this ensures your stepper motors hold their position such as when changing bits over. $110 and $111 can be taken up to at least 3000, this means your machine can fast travel 50% faster.
| $0=10 (Step pulse time, microseconds) |
| $1=25 (Step idle delay, milliseconds) |
| $2=0 (Step pulse invert, mask) |
| $3=0 (Step direction invert, mask) |
| $4=0 (Invert step enable pin, boolean) |
| $5=0 (Invert limit pins, boolean) |
| $6=0 (Invert probe pin, boolean) |
| $10=1 (Status report options, mask) |
| $11=0.010 (Junction deviation, millimeters) |
| $12=0.002 (Arc tolerance, millimeters) |
| $13=0 (Report in inches, boolean) |
| $20=0 (Soft limits enable, boolean) |
| $21=1 (Hard limits enable, boolean) |
| $22=1 (Homing cycle enable, boolean) |
| $23=0 (Homing direction invert, mask) |
| $24=25.000 (Homing locate feed rate, mm/min) |
| $25=500.000 (Homing search seek rate, mm/min) |
| $26=250 (Homing switch debounce delay, milliseconds) |
| $27=3.000 (Homing switch pull-off distance, millimeters) |
| $30=1000 (Maximum spindle speed, RPM) |
| $31=0 (Minimum spindle speed, RPM) |
| $32=0 (Laser-mode enable, boolean) |
| $100=160.000 (X-axis travel resolution, step/mm) |
| $101= 160.000 (Y-axis travel resolution, step/mm) |
| $102= 160.000 (Z-axis travel resolution, step/mm) |
| $110=2000.000 (X-axis maximum rate, mm/min) |
| $111=2000.000 (Y-axis maximum rate, mm/min) |
| $112=2000.000 (Z-axis maximum rate, mm/min) |
| $120=300.000 (X-axis acceleration, mm/sec^2) |
| $121=300.000 (Y-axis acceleration, mm/sec^2) |
| $122=300.000 (Z-axis acceleration, mm/sec^2) |
| $130=600.000 (X-axis maximum travel, millimeters) |
| $131=500.000 (Y-axis maximum travel, millimeters) |
| $132=110.000 (Z-axis maximum travel, millimeters) |
Chris
Any adjustments for the Sainsmart 6060?