Default GRBL settings for the FoxAlien 4040-XE
- James Dean Designs
- January 16, 2022
- FoxAlien 4040-XE
- 4040-XE Default, 4040-XE GRBL, Default GRBL, FoxAlien, FoxAlien GRBL, GRBL settings
- 2 Comments
Below is the list of default GRBL settings for the FoxAlien 4040-XE
| $0=10 |
| $1=25 |
| $2=0 |
| $3=0 |
| $4=0 |
| $5=0 |
| $6=0 |
| $10=3 |
| $11=0.010 |
| $12=0.002 |
| $13=0 |
| $20=0 |
| $21=1 |
| $22=1 |
| $23=3 |
| $24=25.000 |
| $25=500.000 |
| $26=250 |
| $27=3.000 |
| $30=10000 |
| $31=0 |
| $32=1 |
| $100=40.000 |
| $101= 40.000 |
| $102= 160.000 |
| $110=2000.000 |
| $111=2000.000 |
| $112=2000.000 |
| $120=300.000 |
| $121=300.000 |
| $122=300.000 |
| $130=410.000 |
| $131=410.000 |
| $132=65.000 |
Guess
Laser Mode 😉
Chuck D
Was using LaserWeb, made a mistake to load a default setting, overwriting the grbl default settings on XE 4040, this post greatly helped restore the configuration.
Thank you.