Fiber Laser Settings
- James Dean Designs
- January 30, 2024
- Uncategorized
- 0 Comments
![Shot of the products I lasered](https://jamesdeandesigns.com/wp-content/uploads/2024/01/Website.jpg)
These were all done on the ComMarker B4 30w Fiber laser engraver. The examples below contain the settings I used as part of my review – or as best as I can remember the settings.
The are listed as Speed/Power/Frequency/Line Spacing/Angle
![]() | Brass coin 1000/90/50/0.02/45 Additional settings are image mode was set to 3D Slice, Bi-directional travel and 400 passes. A cleaning pass was done at the end with 2000/30/100/0.05/45 |
![]() | Throwing knives 1500/50/20/0.025/45 Done with 200mm lens as a fill. |
![]() | Dog tag 1000/90/25/0.04/45 cross hatch |
![]() | Hair business card Hair 300/10/25/0.025/45 Silver 1000/40/25/0.25/45 |
![]() | Real estate card Silver – 1000/90/25/0.025/45 Cut out – Cant remember these but think it was possibly 300/100/25 using the wobble feature and 3 passes |
![]() | Skynet card 5000/90/40/0.025/45 3 separate passes, one at 45, one at -45 and one at 0 |
![]() | Watch strap 500/50/200/0.1 |
![]() | Knife 60/30/25/0.025/45 |
![]() | Dragon lighter Coming soon (AKA I forgot – will try and remember) |
![]() | Skull lighter Coming soon (AKA I forgot – will try and remember) |