65mm Magnetic Dust Boot – STL Files

Description

65mm Dust boot, with magnetic interchangeable bases for different depths and magnetic hose connection. Including a bristle file that you can print in TPU

THIS IS THE PERSONAL USE VERSION
This digital 3D file is provided for personal use only. Commercial use is strictly prohibited. You may not sell, license, distribute, or share the digital file, nor may you sell any physical objects created from this file.

IF YOU ARE LOOKING TO SELL THIS AS A PHYSICAL PRODUCT USE THIS VERSION.

NOTE – this is for a 2.5in hose. 4in hose will be coming soon.

All the STL files you need to build this, all you need to add are:

6mm x 3mm magnets – https://amzn.to/3MLbCZh

2 x M5 Cap bolts with nuts.

Recommend printing in PTEG but can also be printed in PLA. Most printers can print this without supports, but if you add supports they should be minimal.

Parts included are:

1. Main top section that connects to the spindle
2. Deep base – split into 2 halves
3. Short base – split into 2 halves
4. Hose connector in full
5. Hose connector split in half (avoid supports)
6. Bristle long – will fit the full length of each base piece
7. Bristle short – half the size in case you have a smaller print bed.