Sainsmart Genmitsu 3018 Pro default GRBL settings
- James Dean Designs
- October 25, 2021
- Sainsmart Genmitsu 3018 Pro
- 3018 Pro Default, 3018 Pro default settings, 3018 Pro settings, default grbl settings
- 4 Comments
Below is the list of default GRBL settings for the Sainsmart Genmitsu 3018 Pro
| $0=10 |
| $1=25 |
| $2=0 |
| $3=0 |
| $4=0 |
| $5=0 |
| $6=0 |
| $10=3 |
| $11=0.010 |
| $12=0.002 |
| $13=0 |
| $20=0 |
| $21=1 |
| $22=1 |
| $23=3 |
| $24=25.000 |
| $25=500.000 |
| $26=250 |
| $27=3.000 |
| $30=10000 |
| $31=0 |
| $32=1 |
| $100=40.000 |
| $101= 40.000 |
| $102= 160.000 |
| $110=2000.000 |
| $111=2000.000 |
| $112=2000.000 |
| $120=300.000 |
| $121=300.000 |
| $122=300.000 |
| $130=410.000 |
| $131=410.000 |
| $132=65.000 |
houston junk car
With havin so much content do you ever run into any issues of plagorism or copyright violation?
My website has a lot of unique content I’ve either written myself or outsourced but it looks like a
lot of it is popping it up all over the internet without my permission. Do
you know any ways to help protect against content from being stolen? I’d really appreciate it.
James Dean Designs
To be honest its really difficult. One downside of the internet. There are certain services designed to help with this, for example there is one which searches the internet to find where people have stolen your images and it will also contact them telling them to remove it, but as for written word I’m not 100% sure.
Salim
I am new to CNC Machines and I am having problem with my 3018 Pro. I can not position the work to be done in the centre of the cutting area it cuts on the left corner only and if I want to do another cut next to the first cut it cuts it the top of the first one. I trying to solve this issue out, it is driving me mad. I wonder if you can help me out please.
Will Call
You will recognize this as a first timer. I just got a 3018. the Z access does it go from zero ‘0’ at the it’s top most position away from the work area running minus (-) as it descends to the work. I assume that’s home. workspace all the way back and router to the left.
OR
does the Zero position start from some other position – the work area running plus(+) to reach home.safe?